Overview:

• Flexible
  -possibility of realizing several configurations and of using fingerprints for identification in different types of transaction.
• Easy-yo-use
  -just put the finger on the scanner
  -no codes to enter, no badges to be read
• High security access control
  -fingerprint recognition combined with PROX+ strong controls (time zones, casual codes, eventual PIN management)
  -user's recognition fully guaranteed
  -scarfingers, if any, do not cause alterations in the recognition
• Reliable Time & Attendance
  -no badges that can be lost or copied, which become unreadable or can be used by colleagues
• Protection of personal data
  -no Images are stored inside FingerPROX+
  -during the memorizing phase all templates are acquired in a single scanner
  -it is then possible to transfer them to all other scanners
  -all transactions take place in such a way as to protect the individual privacy

Functionalities

• The PROX+ based authorization list, together with the integrated fingerprint reader, ensure that only an authorized person
  can pass through.
• It can identify a user by fingerprint recognition only (1:n Identification), or by fingerprint plus a card reading or PIN entry (1:1 verification)
• All the usual functions of PROX+ are available; time zone check, programmed access criteria, use of PINs, piloting a relay, user code
  recording, etc.., allowing for an access control system with a high security level.
• Up to 10 different fingerprints can be associated with each user (typically 3 templates per fingerprint), and each FingerPROX+
  can memorize an average of 1400 templates configuration and population features) usable in 1:1 verification mode only.
• User code can be from 00001 to 60000
• Possibility of importing and exporting the fingerprint templates (but not the images), without repeating the recording process.
• Each fingerprint template size can very according to the number of features, from 100 to 500 bytes, with about 300 bytes as average.
• Each fingerprint is recognized in a few seconds (2-5) with a database of 400 fingerprints in 1:n identification mode, and less than
  1 second in 1:1 verification mode. This is the maximum number of templates stored in 1:n identification mode.
• Possibility of deleting one/all fingerprints associated with a single user's code.
• Most of the managing functions, like enrolling new users, deleting old ones, saving/ retrieving fingerprints to/ from PROX+ files,
  can be performed from the FingerPROX+ console or by remote commands through the usual communication channels
  (Ethernet, NET92 and serial RS232).
• Possibility of on-line working with templates database stored on a PC and verification performed on the terminal, for up to 60,000 users.

Hw Specifications
Biometric sensor

• CMOS technology - capasitive effect with 70 grey shades available
• dimensions - 11 x 14 mm
• resolution: 224 x 288 pixels (513 dpi)

Fingerprint verification module

• DSP+ARM based CPU with 512 KB Flash Memory for Fingerprint templates
• 1:N, 1:1 stand alone verification capability or on-line 1:1 verification

Console

• 2 x 16 LCD alphanumeric backlit display
• 24-key numeric key membrane keypad with function keys
• single tone acustic signal
• RF reader for 64 bit read only 125 KHz tags

Communication ports

• NET92: RS485 with TMC protocol
• COM1: RS232, 3/5 wires, multi-functional
• COM2: used by the biometrics module

Optional EtherLite module

• for Ethernet/ IP connections

Input/ Output

• 3mono-stable N.O. relays, max 2A @ 30Vdc
• 4 optp-coupled digital inputs - Input resistance: 1K, activation at @mA, Imax 50mA

Barcode Interface

• Internal RJ11 telephone connector (TMC standard) for TTL non-decoded barcoded readers
  (optical pen, CCD or laser - max 50 scans/ sec.)
• Decodes: C128, C39, I25 (ITF), EAN8/ 13/ UPC

Power Supply

• 350 mA @ 9....18Vdc

Physical Characteristics

• Coated steel plate, hinged, casing with lock
• Size: mm185 x 190 x 90mm (LxWxH)
• Mass: 1950g

Working Environment

• Temperatures:when functioning:0°..+50°
• Humidity: up to 100%