Lecture Seats
 
PAGE 1 | 2
  • Backrest & Seat:
    -Moulded polypropylene.
  • Armrest:
    -Moulded pu armrest.
  • Seat Stand:
    -5 Prong office chair seat base with height adjustable lever.
 
   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Epoxy coated 20mm diameter hollow metal pipe.
  • Accessories:
    -Epoxy coated rack under the seat.
 

   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat:
    -Moulded polypropylene seat with tip up mechanism.
  • Armrest:
    -Moulded pu armrest.
  • Seat Stand:
    -Epoxy coated 38mm x 63mm horizontal beam welded to 25mm x 75mm hollow metal pipe.
  • Installation:
    -Fixed to concrete floor by rawbolts.
 
  • Backrest & Seat:
    -Moulded polypropylene.
  • Arm Support :
    -Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    -ABS Plastic writing tablet 300mm x 370mm fixed onto arm support with aluminium hinges and retractable mechanism.
  • Seat Stand:
    -Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    -Fixed to concrete floor by rawbolts.
 
   
  • Backrest & Seat:
    -Moulded polypropylene.
  • Seat Stand:
    -Chrome plated 12mm diameter metal rods.


 
   
  • Backrest & Seat:
    - Moulded polyurethane foam attached to 12mm thick plywood and upholstered in selected fabric.
  • Arm Support :
    - Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    - ABS Plastic writing tablet 430mm X 290mm fixed onto arm support with aluminium rotating mechanism.
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts    .
 
  • Backrest & Seat:
    - Moulded polyurethane foam attached to 12mm thick plywood and upholstered in selected fabric.
  • Arm Support:
    - Epoxy coated moulded aluminium arm support.
  • Writing Tablet:
    - ABS Plastic writing tablet 300mm X 370mm fixed onto arm support with aluminium hinges and retractable mechanism.
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts    .
 
  • Seat:
    - 18mm Plywood with tip up mechanism.
  • Seat Stand:
    - Epoxy coated 25mm x 75mm hollow beam attached to the table frame with a tip up mechanism.
  • Table Frame:
    - Table stands consisting of 3pcs of 25mm square hollow metal pipe welded together with a metal basket fixed to the back of the modesty panel.
  • Table:
    - 16mm Thick chipboard.
  • Modesty panel:
    - Epoxy coated 0.7mm perforated sheet.
  • Installation:
    - Fixed to concrete floor by rawbolts.
 
  • Backrest & Seat:
    - Moulded polyurethane shell with UV.
  • Installation:
    - Fixed to concrete floor by rawbolts    .
 
 
 
 
  • Backrest & Seat:
    - Moulded polypropylene
  • Writing Tablet:
    - ABS writing tablet 430mm x 290mm fixed onto arm support with aluminium rotating mechanism
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with round plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts.
 
  • Backrest & Seat:
    - Moulded polypropylene
  • Armrest:
    - Moulded polypropylene amrest fixed onto metal support
  • Writing Table:
    - ABBS Plastic writing tablet 300mm x 370mm fixed onto arm support with aluminium fold up rotating mechanism
  • Seat Stand:
    - Epoxy coated 50mm square horizontal beam welded to 50mm diameter metal pipe with rounf plate base.
  • Installation:
    - Fixed to concrete floor by rawbolts.
 
 SZE CHUAN SDN. BHD. Co.No. 63618-T
 No. 6 Jalan Rajawali 1A, Bandar Puchong Jaya Industrial Park, 13Km Jalan Puchong,
 47100 Selangor Darul Ehsan, Malaysia.
 Tel: +(60)3-80756500     Fax: +(60)3-80756505    
 Email: szechuan00@unifi.my,szechuan1995@yahoo.com
 Hosted by: AsiaPacific NET