Products Overview



Nyatoh (local)

Ramin (local)

Kembang Semangkok (local)

Red Oak (USA)

White Oak (USA)

Cherry (USA)

Maple (USA)


Ash/Sen (Russia)

pine.jpg (9359 bytes) Eastern   Knotty
Pine from USA
American
White  Ash
whiteash.jpg (10005 bytes)

 

Veneer Species
Red Oak from USA

White Oak from USA

Cherry from USA

Maple from USA

American White Ash

Eastern Knotty Pine from USA

Ash (Sen) from Russia

Nyatoh (local)

Ramin (local)

Kembang Semangkok (local)

0.4mm

0.4mm

0.5mm

0.5mm

0.6mm

1.0mm

0.4mm

0.3mm

0.3mm

0.3mm

 

These high quality sliced fancy veneers are suitable for overlay on plywood, MDF and on other panels and for making laminated lumber and edging. Moisture content is below 12%M.C.

At the same time, we are now producing real decorative fancy plywood (3’x 6’, 3’x 7’ & 4’x 8’) with the above species as well as to laminate on MDF boards and other panels. We are keen to produce other species & thicknesses to suit your specif requirements.

Besides these, we also produce MR (moisture resistant) ordinary plywood utility grade of various thicknesses and sizes such as 3.2mm, 9mm and 12mm, and have recently exported to Sri Lanka, India and Blangladesh.

In addition, we have Nyatoh, Ramin and KSK planks of 1"x 5" wide by 100"long and flitches 1 ft and longer, available for sale at fair prices.

 

Quality and Standard

  1. Fancy plywood is a high end product, and is not easily produced without skilled knowledge and experience. Hence, additional high-tech machines are installed to complement increased production to meet market requirements.
  2. All our veneer are spliced by glue or zig-zag glue threads (Kuper machines & Ruckle cross-feed splicer).
  3. We can produce layon veneers up to your requirement.
  4. Other thickneses and veneer species are also available.
  5. With the new automation in operation, we are placed in an advantageous position to sell our products at an affordable price. Manual operation is reduced to minimum, and workers are taught to operate the various machines up to finished products much more efficiently instead of manual operation.
  6. A well-made panel is a much sought after product, and is well received by both end users and traders.
  7. The veneers are spliced automatically and accurately to make good standardized panels that are accepted by the market. The standard of level is very high to meet both domestic and export markets.

 

Good News

We have installed a cross-feed veneer splicer using the latest European technology to produce a 4’x 8’ single layon or full veneer sheet.

Using special glue, it is able to splice any veneer thickness from thin veneer to 1.5mm, and its self integrated clipper is to cut the spliced veneer into any desired width to meet your requirements.

The full veneer sheets will be stacked automatically by a special device, to avoid any split or crack, so that a perfect panel will be produced up to your expectation for decorative, constructive and structural purposes.

We warmly welcome your inquiry for high quality veneer and/or fancy plywood and ordinary plywood. Most of all, we look forward to your esteemed visit to our mill.

 


Joowood Sdn Berhad (146363-A)
AS-76, Salak South Garden, 57100 Kuala Lumpur, Malaysia
Tel : +603-783 4266, 783 5863, 782 3823, 782 3923
Fax : +603-781 4119



Hosted by