Acoustics FAQ
 Project Reference
 Noise Legislation
 Request for Catalogues

 Welcome Page

[ Back to Project Reference main page ]

[top]	ISTIQ Acoustic Enclosure for 6 FE Outset Machine at Matsushita (MECOM) P. Jaya. Noise level was reduced from 94 dB(A) to 80dB(A). Scope of work includes Design, Fabricate, Install and Commissioning.
[top]	ISTIQ Acoustic Enclosure for HIKADA Press Machine at Carrier Bangi, Selangor. Noise level was reduced from 97 dB(A) to 83 dB(A) measured at 1 meter away. Scope of work includes Design, Fabricate, Install and commissioning.
[top]	Gensets Acoustic Treatment on 7 x 1875 kVA (Cat 3561 TA) at KLCC Tower 1 and 2. Noise level was treated down to 85 dB(A) measured at 1 meter away from the genset room. Scope of work; Design and Supply. Application of ISTIQ products were Duct Silencers, Supercritical Exhaust Silencers and Acoustic Doors.
[top]	Acoustic Wall Treatment for Fuel Testing Lab at Petronas Sg. Udang, Malacca. Noise level was reduced from 87 dB(A) down to 80 dB(A). Scope of work; Design, supply and installation. The lab is used to test the quality of the fuel by monitoring the performance of the engine.
[top]	Acoustic Treatment on Blower Fans at Genting Sanyen, Banting Selangor. Noise level was reduced from 93 dB(A) to 70 dB(A) measured at 1 meter away. Products applied was ISTIQ Acoustic Enclosure. Duct Silencers were also used to control noise from the ventilation fan. Scope of work; Design, Fabricate, Install and commission.
[top]	Fabrication of Acoustic Enclosure to be installed for the LPG Compressors, SHELL Port Dickson. The fabrication work was done at our factory and sent out to the site after it has been tested and approved by the client.